RX 350 FWD V6-3.5L (2GR-FE) (2010)
/Page-2360003.png)
3. Check the harness and connector (A/C compressor flow sensor - A/C amplifier).
A. Disconnect the A/C amplifier connector.
B. Measure the resistance according to the value(s) in the table.
^
If any of the harness resistance tests fail this TSIB does NOT apply. Repair or replace the harness and go to step 5.
^
If all tests are within specifications proceed to step 4.
4. Remove and replace the A/C compressor.
Refer to TIS 2010 model year RX 350 Repair Manual:
^ Vehicle Interior - Heating/Air Conditioning - "Heating/Air Conditioning: Compressor: Removal (to 8/2009)* / (from 8/2009)**
^ Vehicle Interior - Heating/Air Conditioning - "Heating/Air Conditioning: Compressor: Installation (8/2009)* / (from 8/2009)**
* Japan production vehicles (JTJ)
** NAP vehicles (2T)
5. Clear all DTCs and confirm the A/C system has returned to proper operation.