RX 350 FWD V6-3.5L (2GR-FE) (2010)
21. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service
and Repair/Removal and Replacement/Removal
22. DISCONNECT SUCTION PIPE SUB-ASSEMBLY
(a) Disengage the 6 clamps and separate the engine wire harness.
(b) Remove the bolt and slide the hook connector.
(c) Disconnect the suction pipe assembly.
(d) Remove the O-ring from the suction pipe sub-assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
23. DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
(a) Disconnect the air conditioning tube and accessory assembly.
(b) Remove the O-ring from the air conditioning tube and accessory assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
24. DISCONNECT OUTLET HEATER WATER HOSE
(a) Using pliers, grip the claws of the clip and slide the clip to disconnect the outlet heater water hose.
NOTICE:
*
Do not apply excessive force to the outlet heater water hose.
*
Prepare a drain pan or cloth in case the coolant leaks.
25. DISCONNECT INLET HEATER WATER HOSE
(a) Using pliers, grip the claws of the clip and slide the clip to disconnect the inlet heater water hose.