RX 350 FWD V6-3.5L (2GR-FE) (2010)
HINT
Use the same procedure for the RH side and LH side.
91. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Installation
92. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Installation
93. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Installation
94. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Installation
95. INSTALL FRONT WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation
96. INSTALL FRONT FENDER TO COWL SIDE SEAL RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
97. INSTALL FRONT FENDER TO COWL SIDE SEAL LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
98. INSTALL FRONT FENDER TOP REINFORCEMENT SUB-ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and
Repair/Front Wiper Motor/Installation
99. INSTALL FRONT FENDER TOP REINFORCEMENT SUB-ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and
Repair/Front Wiper Motor/Installation
100. INSTALL FRONT SEAT ASSEMBLY
(a) for LH Side:
(1) Refer to the procedure from Install Front Seat Assembly See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Installation.
(b) for RH Side:
HINT
Use the same procedure for the RH side and LH side.
101. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
*
Make sure that the cable has been disconnected from the negative (-) battery terminal for at least 2 seconds before reconnecting
the cable.
*
Reset the auto tilt away function setting to the previous condition by changing the customize parameter See: Steering and
Suspension/Steering/Steering Column/Testing and Inspection/Programming and Relearning.
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
102. INSTALL FRONT WHEEL LH See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Installation
103. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
104. ADD ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
105. CHARGE WITH REFRIGERANT See: Service and Repair
106. WARM UP ENGINE See: Service and Repair
107. INSPECT FOR REFRIGERANT LEAK See: Service and Repair
108. INSPECT FOR COOLANT LEAK See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection