RX 350 FWD V6-3.5L (2GR-FE) (2010)
Audible Warning Device: Service and Repair
Installation
Up to 08/2009
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER: INSTALLATION
1. INSTALL SKID CONTROL BUZZER ASSEMBLY
(a) Connect the skid control buzzer connector.
(b) Install the skid control buzzer clamp.
2. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
HINT
Refer to the procedure up to Install Instrument Panel Junction Block Assembly See: Relays and Modules/Relays and Modules -
Steering and Suspension/Relays and Modules - Steering/Steering Control Module/Service and Repair/Installation.
3. INSTALL KNEE AIRBAG ASSEMBLY
HINT
Refer to the procedure up to Install Driver Side Knee Airbag Assembly See: Restraint Systems/Air Bag Systems/Air Bag/Service
and Repair/Removal and Replacement/Knee Airbag Assembly (for Driver Side)/Installation.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
5. INSPECT SRS WARNING LIGHT
HINT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.
From 08/2009
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER: INSTALLATION
1. INSTALL SKID CONTROL BUZZER ASSEMBLY
(a) Connect the skid control buzzer connector.