RX 350 FWD V6-3.5L (2GR-FE) (2010)
(b) Install the skid control buzzer clamp.
2. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
HINT
Refer to the procedure up to Install Instrument Panel Junction Block Assembly See: Relays and Modules/Relays and Modules -
Steering and Suspension/Relays and Modules - Steering/Steering Control Module/Service and Repair/Installation.
3. INSTALL KNEE AIRBAG ASSEMBLY
HINT
Refer to the procedure up to Install Driver Side Knee Airbag Assembly See: Restraint Systems/Air Bag Systems/Air Bag/Service
and Repair/Removal and Replacement/Knee Airbag Assembly (for Driver Side)/Installation.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
5. INSPECT SRS WARNING LIGHT
HINT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.