RX 350 FWD V6-3.5L (2GR-FE) (2010)
(b) Disconnect the ECM connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
(d) Reconnect the combination meter assembly connector.
(e) Reconnect the ECM connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (COMBINATION METER ASSEMBLY - ECM)
OK -- REPLACE COMBINATION METER ASSEMBLY See: Instrument Cluster / Carrier/Service and Repair/Removal and
Replacement/Combination Meter/Removal
5. CHECK IF ENGINE STARTS
(a) Start the engine.
Result:
HINT
*: The Techstream cannot communicate with the ECM.
B -- GO TO VC OUTPUT CIRCUIT See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Component
Tests and General Diagnostics/VC Output Circuit/From 08/2009
A -- Continue to next step.
6. CHECK HARNESS AND CONNECTOR (ECM TERMINAL VOLTAGE)
(a) Disconnect the ECM connector.