RX 350 FWD V6-3.5L (2GR-FE) (2010)
Parking Assist Warning Indicator: Service and Repair
Removal
Up to 08/2009
PARK ASSIST / MONITORING: CLEARANCE WARNING BUZZER: REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Removal
4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Removal
5. REMOVE INSTRUMENT PANEL GARNISH LH See: Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal
6. REMOVE NO. 1 SWITCH HOLE BASE See: Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal
7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
8. REMOVE INSTRUMENT PANEL FINISH PANEL See: Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal
9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL See: Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Removal
10. REMOVE RADIO RECEIVER ASSEMBLY WITH REGISTER See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Removal
11. REMOVE CLEARANCE WARNING BUZZER
(a) Disconnect the connector.
(b) Disengage the clamp and remove the clearance warning buzzer.
From 08/2009
PARK ASSIST / MONITORING: CLEARANCE WARNING BUZZER: REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.