RX 350 FWD V6-3.5L (2GR-FE) (2010)
(a) Disconnect the connector.
(b) Using a T30 "TORX" socket wrench, remove the "TORX" bolt and rear door courtesy light switch assembly.
From 08/2009
LIGHTING (INT): REAR DOOR COURTESY SWITCH: REMOVAL
1. REMOVE REAR SEAT ASSEMBLY LH (for LH Side)
HINT
Refer to the procedure up to Remove Rear Seat Assembly LH See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for LH Side)/Removal.
2. REMOVE REAR SEAT ASSEMBLY RH (for RH Side)
HINT
Refer to the procedure up to Remove Rear Seat Assembly RH See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for RH Side)/Removal.
3. REMOVE REAR DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
4. REMOVE REAR SEAT SIDE COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
5. REMOVE REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Using a T30 "TORX" socket wrench, remove the "TORX" bolt and rear door courtesy light switch assembly.
Up to 08/2009
LIGHTING (INT): REAR DOOR COURTESY SWITCH: INSTALLATION
1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY
(a) Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the "TORX" bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the connector.
2. INSTALL REAR SEAT SIDE COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and