RX 350 FWD V6-3.5L (2GR-FE) (2010)
(b) Disengage the clamp.
(c) Remove the bolt.
(d) Remove the 3 bolts and back door lock assembly.
From 08/2009
LIGHTING (INT): BACK DOOR COURTESY SWITCH: REMOVAL
1. REMOVE TONNEAU COVER SUB-ASSEMBLY
2. REMOVE BACK DOOR FINISH COVER LH (w/o Power Back Door) See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service
and Repair/Overhaul/Disassembly
3. REMOVE BACK DOOR TRIM BASE (w/ Power Back Door) See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
4. REMOVE BACK DOOR FINISH COVER RH (w/o Power Back Door) See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service
and Repair/Overhaul/Disassembly
5. REMOVE DOOR PULL HANDLE WITH SWITCH (w/ Power Back Door) See: Body and Frame/Doors, Hood and Trunk/Trunk /
Liftgate/Service and Repair/Overhaul/Disassembly
6. REMOVE BACK DOOR LOCK COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
7. REMOVE NO. 2 ROOM LIGHT ASSEMBLY See: Trunk Lamp/Service and Repair/Removal
8. REMOVE BACK DOOR UPPER TRIM COVER LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
9. REMOVE BACK DOOR UPPER TRIM COVER RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
10. REMOVE BACK DOOR SERVICE HOLE COVER LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
11. REMOVE BACK DOOR SERVICE HOLE COVER RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
12. REMOVE BACK DOOR TRIM PANEL ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
13. REMOVE BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)
(a) Disconnect the connector.