RX 350 FWD V6-3.5L (2GR-FE) (2010)
Replacement/Removal
3. REMOVE COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
4. REMOVE HOOD CENTER CUSHION See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Removal
5. REMOVE FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
6. REMOVE FOG LIGHT ASSEMBLY
(a) Remove the screw.
(b) Disengage the 2 guides and remove the fog light assembly.
Installation
LIGHTING (EXT): FOG LIGHT ASSEMBLY: INSTALLATION
1. INSTALL FOG LIGHT ASSEMBLY
(a) Engage the 2 guides.
(b) Install the fog light assembly with the screw.
2. INSTALL FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
3. INSTALL HOOD CENTER CUSHION See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Installation
4. INSTALL COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
5. INSTALL ENGINE ROOM SIDE COVER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
6. INSTALL ENGINE ROOM SIDE COVER LH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
7. ADD WASHER FLUID (w/ Headlight Cleaner System) See: Wiper and Washer Systems/Windshield Washer Motor/Service and Repair/Washer
Motor (for Front Side)/Installation
8. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT See: Adjustments
9. PREPARE FOR FOG LIGHT AIMING See: Adjustments
10. INSPECT FOG LIGHT AIMING See: Adjustments
11. ADJUST FOG LIGHT AIMING See: Adjustments