RX 350 FWD V6-3.5L (2GR-FE) (2010)
NOTICE:
Do not touch the bulb glass.
From 08/2009
LIGHTING (EXT): HIGH INTENSITY DISCHARGE HEADLIGHT BULB: REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
3. REMOVE ENGINE ROOM SIDE COVER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
4. REMOVE ENGINE ROOM SIDE COVER LH (for LH Side) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
5. REMOVE COOL AIR INTAKE DUCT SEAL (for LH Side) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
6. REMOVE NO. 1 HEADLIGHT BACK COVER
(a) Turn the No. 1 headlight back cover in the direction indicated by the arrow shown in the illustration, and remove it.
7. REMOVE DISCHARGE HEADLIGHT BULB
(a) Separate the light control ECU socket in the direction indicated by the arrow shown in the illustration.