RX 350 FWD V6-3.5L (2GR-FE) (2010)
Headlamp Dimmer Switch: Service and Repair
Installation
Up to 08/2009
LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: INSTALLATION
1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
(a) Using pliers, expand the clamp.
(b) While holding the clamp expanded, install the headlight dimmer switch assembly as shown in the illustration.
(c) Engage the claw.
(d) Install the headlight dimmer switch assembly with the clamp.
(e) Connect the connector.
2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Wiper
Switch/Service and Repair/Installation
3. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral
Cable/Service and Repair/Installation
4. INSTALL UPPER STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Installation
5. INSTALL LOWER STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Installation
6. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD
7. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral
Cable/Service and Repair/Installation
8. INSTALL STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Installation
9. INSPECT STEERING WHEEL CENTER POINT