RX 350 FWD V6-3.5L (2GR-FE) (2010)
(a) Remove the 2 bolts and rear side marker light assembly.
From 08/2009
LIGHTING (EXT): REAR SIDE MARKER LIGHT ASSEMBLY: REMOVAL
1. REMOVE NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR See: Body and Frame/Bumper/Rear Bumper/Service and
Repair/Removal and Replacement/Removal
2. REMOVE NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR See: Steering and Suspension/Suspension/Suspension Control (
Automatic - Electronic )/Compressor/Pump/Service and Repair/Removal
3. REMOVE REAR BUMPER ASSEMBLY See: Body and Frame/Bumper/Rear Bumper/Service and Repair/Removal and Replacement/Removal
4. REMOVE REAR SIDE MARKER LIGHT ASSEMBLY
(a) Remove the 2 bolts and rear side marker light assembly.
Up to 08/2009
LIGHTING (EXT): REAR SIDE MARKER LIGHT ASSEMBLY: INSTALLATION
1. INSTALL REAR SIDE MARKER LIGHT ASSEMBLY
(a) Install the rear side marker light assembly with the 2 bolts.
2. INSTALL REAR BUMPER ASSEMBLY See: Body and Frame/Bumper/Rear Bumper/Service and Repair/Removal and
Replacement/Installation
3. INSTALL NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR See: Body and Frame/Bumper/Rear Bumper/Service and
Repair/Removal and Replacement/Installation
4. INSTALL NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR See: Steering and Suspension/Suspension/Suspension Control (
Automatic - Electronic )/Compressor/Pump/Service and Repair/Installation
From 08/2009
LIGHTING (EXT): REAR SIDE MARKER LIGHT ASSEMBLY: INSTALLATION
1. INSTALL REAR SIDE MARKER LIGHT ASSEMBLY
(a) Install the rear side marker light assembly with the 2 bolts.