RX 350 FWD V6-3.5L (2GR-FE) (2010)
(p) If the fuel pressure is not as specified, check the fuel pump, pressure regulator and/or fuel injectors.
(q) After checking the fuel pressure, disconnect the cable from the negative (-) battery terminal and carefully remove SST to prevent gasoline from
splashing.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
(r) Reconnect the fuel tube to the main fuel tube (fuel tube connector).
(s) Install the No. 1 fuel pipe clamp to the fuel tube connector.
(t) Check for fuel leaks (Step 1).
(1) Check that there are no fuel leaks from the fuel system after doing any maintenance or repairs. If there is a fuel leak, repair or replace parts
as necessary.