RX 350 FWD V6-3.5L (2GR-FE) (2010)
16. REMOVE IGNITION COIL ASSEMBLY
(a) Disconnect the 3 wire harness clamps.
(b) Disconnect the 6 ignition coil connectors.
(c) Remove the 6 bolts and 6 ignition coils.
17. REMOVE SPARK PLUG
(a) Remove the 6 spark plugs.
From 08/2009
2GR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: REMOVAL
1. PRECAUTION (w/ Air Suspension)
NOTICE:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Suspension/Service Precautions/Suspension
Control System.
2. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
3. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Remove the windshield wiper motor and link assembly See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal.
4. REMOVE FRONT SHOCK ABSORBER CAP (w/ Air Suspension) See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Removal and Replacement/Front Shock Absorber (w/ Air Suspension)/Removal
5. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service
and Repair/Removal and Replacement/Removal