RX 350 FWD V6-3.5L (2GR-FE) (2010)
Wheel Fastener: Service and Repair
Front Axle Hub Bolt
Components
AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: COMPONENTS
Up to 08/2009
AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: REPLACEMENT
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. PRECAUTION (w/ Air Suspension)
NOTICE:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Suspension/Service Precautions/Suspension
Control System.
2. REMOVE FRONT WHEEL
3. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY See: Steering and Suspension/Suspension/Ball Joint/Service and Repair/Removal
4. REMOVE FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front
Brake/Removal
5. REMOVE FRONT AXLE HUB BOLT
(a) Position the front axle hub bolt to be removed as shown in the illustration.
(b) Temporarily install 2 nuts to the front axle hub bolt as shown in the illustration.