RX 350 FWD V6-3.5L (2GR-FE) (2010)
(d) Remove the power point socket assembly and power point socket cover in the direction shown in the illustration.
(e) Using a screw driver, disengage the claw and remove the power point socket assembly from the power point socket cover as shown in the
illustration.
Up to 08/2009
POWER OUTLETS (INT): POWER OUTLET SOCKET: INSTALLATION
1. INSTALL POWER POINT SOCKET ASSEMBLY
(a) Engage the 4 claws to install the 2 new power point socket covers.
(b) Engage the 2 claws to install the 2 power point socket assemblies.
(c) Connect each connector.
(d) Engage the 2 clamps.
2. INSTALL STEREO JACK ADAPTER ASSEMBLY See: Accessories and Optional Equipment/Entertainment Systems/Auxiliary Input / Output
Jack/Service and Repair/Installation
3. INSTALL FRONT CONSOLE UPPER PANEL GARNISH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Overhaul/Reassembly
4. INSTALL LOWER CONSOLE BOX POCKET See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Overhaul/Reassembly
5. INSTALL CONSOLE COIN BOX See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Overhaul/Reassembly
6. INSTALL REAR CONSOLE BOX ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Installation
7. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ USB Audio System) See: Accessories and Optional Equipment/Entertainment
Systems/Entertainment System Control Module/Service and Repair/Multi-Media Interface ECU/Installation
8. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Installation
9. INSTALL NO. 2 CONSOLE BOX DUCT See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and