RX 350 FWD V6-3.5L (2GR-FE) (2010)
A. Unscrew the plastic cap on the male end of the connector and remove the fuse and metal cap. (See Figure 3.)
B. If the 8 amp fuse is open replace.
3. Clean metal cap and fuse metal contacts.
A. Using an electronic contact cleaner clean the inside of the metal cap thoroughly with a cotton swab or similar cleaning device. (See Figure 4.)
Inside of cap should be cleaned to remove all residue.
B. Using an electronic contact cleaner clean the metal contacts on both sides of the fuse with a clean cloth. (See Figure 5.)
Fuse contacts on both sides should be cleaned to remove all residue.