RX 350 FWD V6-3.5L (2GR-FE) (2010)
Repair/Removal and Replacement/Removal
4. REMOVE NO. 1 SWITCH HOLE BASE See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
6. REMOVE INVERTER MAIN SWITCH ASSEMBLY
(a) Disengage the 2 claws and remove the inverter main switch assembly.