RX 350 FWD V6-3.5L (2GR-FE) (2010)
HINT
Make sure to keep the angle 20o or more as shown in the illustration.
(b) Slide the guide of the multiplex network body ECU along the housing sidewall toward the junction block fuses as shown in the illustration.
Text in Illustration
(c) Slide the multiplex network body ECU so that it contacts side A as shown in the illustration.
Text in Illustration
NOTICE:
Do not apply excessive force to the multiplex network body ECU.
(d) While contacting the multiplex network body ECU to side A of the junction block (point of rotation), rotate it downward as shown in the
illustration.
Text in Illustration
(e) Press the push area until the claw engages to install the multiplex network body ECU.