RX 350 FWD V6-3.5L (2GR-FE) (2010)
NG -- CHECK FOR OPEN IN CAN BUS WIRE (CAN NO. 2 J/C)
OK -- REPLACE CAN NO. 1 JUNCTION CONNECTOR
6. CHECK FOR OPEN IN CAN BUS WIRE (CAN NO. 2 J/C)
(a) Reconnect the CAN No. 1 junction connector.
(b) Disconnect the CAN No. 2 junction connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
Result:
C -- REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CAN NO. 1 J/C - CAN NO. 2 J/C)
B -- REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CAN NO. 2 J/C - CERTIFICATION ECU)
A -- REPLACE CAN NO. 2 JUNCTION CONNECTOR
From 08/2009
NETWORKING: CAN COMMUNICATION SYSTEM: Open in CAN Main Bus Line
- Open in CAN Main Bus Line
DESCRIPTION
There may be an open circuit in the CAN bus main wire and/or the DLC3 branch wire when the resistance between terminals 6 (CANH) and 14 (CANL)
of the DLC3 is 70 Ohms or higher.