RX 350 FWD V6-3.5L (2GR-FE) (2010)
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CHECK FOR OPEN IN CAN BUS WIRE (CAN NO. 1 J/C)
OK -- REPLACE CERTIFICATION ECU
4. CHECK FOR OPEN IN CAN BUS WIRE (CAN NO. 1 J/C)
(a) Disconnect the CAN No. 1 junction connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CAN NO. 1 J/C - ECM)
OK -- Continue to next step.
5. CHECK FOR OPEN IN CAN BUS WIRE (CAN NO. 1 J/C - CAN NO. 2 J/C)
(a) Reconnect the certification ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration