RX 350 FWD V6-3.5L (2GR-FE) (2010)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 1 J/C - COMBINATION METER)
OK -- Continue to next step.
5. CHECK FOR SHORT IN CAN BUS WIRE (CAN NO. 1 J/C - STEERING ANGLE SENSOR)
(a) Disconnect the steering angle sensor connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration