RX 350 FWD V6-3.5L (2GR-FE) (2010)
(a) Reconnect the combination meter connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE COMBINATION METER ASSEMBLY See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster
/ Carrier/Service and Repair/Removal and Replacement/Combination Meter/Removal
OK -- Continue to next step.
13. CHECK FOR SHORT IN CAN BUS WIRES (STEERING ANGLE SENSOR)
(a) Reconnect the steering angle sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE SPIRAL CABLE W/STEERING SENSOR SUB-ASSEMBLY See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Steering Angle Sensor/Service and Repair/Removal
OK -- Continue to next step.
14. CHECK FOR SHORT IN CAN BUS WIRE (POWER STEERING ECU)
(a) Reconnect the power steering ECU connector.