RX 350 FWD V6-3.5L (2GR-FE) (2010)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE POWER STEERING ECU See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and
Modules - Steering/Steering Control Module/Service and Repair/Removal
OK -- Continue to next step.
15. CHECK FOR SHORT IN CAN BUS WIRES (YAW RATE SENSOR)
(a) Reconnect the yaw rate sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE YAW RATE SENSOR ASSEMBLY See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Acceleration/Deceleration Sensor/Service and Repair/Removal
OK -- Continue to next step.
16. CHECK FOR SHORT IN CAN BUS WIRES (POWER MANAGEMENT CONTROL ECU)
(a) Reconnect the power management control ECU connector.
(b) Measure the resistance according to the value(s) in the table below.