RX 350 FWD V6-3.5L (2GR-FE) (2010)
/Page-1236112.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 1 J/C - POWER STEERING ECU)
OK -- REPLACE POWER STEERING ECU See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and
Modules - Steering/Steering Control Module/Service and Repair/Removal
8. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 1 J/C - STEERING ANGLE SENSOR)
(a) Disconnect the steering angle sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
