RX 350 FWD V6-3.5L (2GR-FE) (2010)
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 1 J/C - YAW RATE SENSOR)
OK -- REPLACE YAW RATE SENSOR ASSEMBLY See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Acceleration/Deceleration Sensor/Service and Repair/Removal
15. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 2 J/C - SKID CONTROL ECU)
(a) Disconnect the skid control ECU connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 2 J/C- SKID CONTROL ECU)
OK -- REPLACE BRAKE ACTUATOR (SKID CONTROL ECU) See: Brakes and Traction Control/Antilock Brakes / Traction
Control Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair/Removal
16. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 2 J/C - CERTIFICATION ECU)
(a) Disconnect the certification ECU connector.