RX 350 FWD V6-3.5L (2GR-FE) (2010)
(a) Disconnect the main body ECU connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 1 J/C - MAIN BODY ECU)
OK -- REPLACE MULTIPLEX NETWORK BODY ECU (MAIN BODY ECU) See: Body Control Module/Service and
Repair/Removal
11. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 1 J/C - ECM)
(a) Disconnect the ECM connector.
Text in Illustration