RX 350 FWD V6-3.5L (2GR-FE) (2010)
/Page-1237033.png)
*
*1: DTC is not output during communication error, but will be output as a history DTC (past DTC) when communication returns
to normal.
*
*2: DTC is not output during communication error.
*
*3: DTC U0100, U0123, U0124 and U0126 are not stored when DTC U0073 has already been stored.
*
Skid Control ECU Communication Stop Mode See: Component Tests and General Diagnostics/Skid Control ECU Communication
Stop Mode
*
Power Steering ECU Communication Stop Mode See: Component Tests and General Diagnostics/Power Steering ECU
Communication Stop Mode
*
Steering Angle Sensor Communication Stop Mode See: Component Tests and General Diagnostics/Steering Angle Sensor
Communication Stop Mode
*
Yaw Rate Sensor Communication Stop Mode See: Component Tests and General Diagnostics/Yaw Rate Sensor Communication Stop
Mode
*
ECM Communication Stop Mode See: Component Tests and General Diagnostics/ECM Communication Stop Mode
*
Main Body ECU Communication Stop Mode See: Component Tests and General Diagnostics/Main Body ECU Communication Stop
Mode
*
Combination Meter ECU Communication Stop Mode See: Component Tests and General Diagnostics/Combination Meter ECU
Communication Stop Mode
*
Center Airbag Sensor Communication Stop Mode See: Component Tests and General Diagnostics/Center Airbag Sensor
Communication Stop Mode
*
Certification ECU Communication Stop Mode See: Component Tests and General Diagnostics/Certification ECU Communication
Stop Mode
*
Power Management ECU Communication Stop Mode See: Component Tests and General Diagnostics/Power Management Control
ECU Communication Stop Mode
Fail-Safe Chart
NETWORKING: CAN COMMUNICATION SYSTEM: FAIL-SAFE CHART
1. FAIL-SAFE FUNCTION
(a) When communication fails in any of the CAN bus wires (communication wires), a fail-safe function(s) will operate. The fail-safe function that
is specified for each system operates to prevent those systems from malfunctioning.
(b) Effects on each system when communication is impossible.
