RX 350 FWD V6-3.5L (2GR-FE) (2010)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (GROUND CIRCUIT)
OK -- REPLACE SPIRAL CABLE W/ STEERING ANGLE SENSOR SUB-ASSEMBLY See: Brakes and Traction
Control/Antilock Brakes / Traction Control Systems/Steering Angle Sensor/Service and Repair/Removal
Up to 08/2009
NETWORKING: CAN COMMUNICATION SYSTEM: Yaw Rate Sensor Communication Stop Mode
- Yaw Rate Sensor Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
*
Turn the engine switch off before measuring the resistances between CAN bus main wires and between CAN bus branch wires.