RX 350 FWD V6-3.5L (2GR-FE) (2010)
/Page-1237126.png)
1. CHECK FOR SHORT TO +B IN CAN BUS WIRE (CAN NO. 1 J/C - CAN NO. 2 J/C)
(a) Disconnect the cable from the negative (-) battery terminal.
(b) Disconnect the CAN No. 1 junction connector.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- CHECK FOR SHORT TO +B IN CAN BUS WIRE (CAN NO. 2 J/C - CAN NO. 1 J/C)
OK -- Continue to next step.
2. CHECK FOR SHORT TO +B IN CAN BUS WIRE (CAN NO. 1 J/C)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
