RX 350 FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 2 J/C - NAVIGATION ECU)
OK -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY (NAVIGATION ECU) See: Accessories and Optional
Equipment/Navigation System/Service and Repair/Navigation Receiver (for HDD)/Removal
Part 1
NETWORKING: CAN COMMUNICATION SYSTEM: Check CAN Bus Line for Short to +B
- Check CAN Bus Line for Short to +B
DESCRIPTION
There may be a short circuit between the CAN bus main wire and +B when no resistance exists between terminals 6 (CANH) and 16 (BAT) or 14
(CANL) and 16 (BAT) of the DLC3.