RX 350 FWD V6-3.5L (2GR-FE) (2010)
11. CHECK FOR SHORT TO +B IN CAN BUS WIRE (CAN NO. 1 J/C - ECM)
(a) Disconnect the ECM connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CAN NO. 1 J/C - ECM)
OK -- REPLACE ECM See: Engine Control Module/Service and Repair/Removal
12. CHECK FOR SHORT TO +B IN CAN BUS WIRE (CAN NO. 1 J/C - POWER MANAGEMENT CONTROL ECU)
(a) Disconnect the power management control ECU connector.
Text in Illustration