RX 350 FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CAN NO. 2 JUNCTION CONNECTOR -
CERTIFICATION ECU)
OK -- REPLACE SMART KEY ECU ASSEMBLY (CERTIFICATION ECU)
17. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 2 J/C - NAVIGATION ECU)
(a) Disconnect the navigation ECU connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.