RX 350 FWD V6-3.5L (2GR-FE) (2010)
Required Tools & Equipment
Repair Procedure
1. Confirm the water leak.
Run water over the exterior of the vehicle (near top of windshield) and check interior for water intrusion.
2. Confirm the water leak location.
A. Remove the A-pillar garnish.
2010 RX 350 vehicles with a production date of 07/2009 and earlier [steps 1 - 3]:
(1) Pull the upper part of the garnish toward the inside of the cabin and disengage the 2 clips.
(2) Cut off clip A.
(3) Disengage the 2 guides and remove the front pillar garnish.