RX 350 FWD V6-3.5L (2GR-FE) (2010)
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
3. REMOVE NO. 1 RELAY BLOCK COVER
(a) Disengage the 3 claws and remove the upper No. 1 relay block cover.
(b) Disengage the 4 claws and remove the lower No. 1 relay block cover.
4. REMOVE ENGINE ROOM JUNCTION BLOCK ASSEMBLY
(a) Disengage the 2 claws and pull up the engine room junction block assembly as shown in the illustration.
(b) Disconnect the 3 connectors and remove the engine room junction block assembly.