RX 350 FWD V6-3.5L (2GR-FE) (2010)
Air Flow Meter/Sensor: Service and Repair
Removal
Up to 08/2009
2GR-FE ENGINE CONTROL: MASS AIR FLOW METER: REMOVAL
1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Remove the windshield wiper motor and link assembly See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal.
2. REMOVE FRONT SHOCK ABSORBER CAP (w/ Air Suspension) See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Removal and Replacement/Front Shock Absorber (w/ Air Suspension)/Removal
3. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service
and Repair/Removal and Replacement/Removal
4. REMOVE MASS AIR FLOW METER
(a) Separate the mass air flow meter connector.
(b) Remove the 2 screws and mass air flow meter.
From 08/2009
2GR-FE ENGINE CONTROL: MASS AIR FLOW METER: REMOVAL
1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Remove the windshield wiper motor and link assembly See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal.
2. REMOVE FRONT SHOCK ABSORBER CAP (w/ Air Suspension) See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Removal and Replacement/Front Shock Absorber (w/ Air Suspension)/Removal
3. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service
and Repair/Removal and Replacement/Removal
4. REMOVE MASS AIR FLOW METER
(a) Separate the mass air flow meter connector.
(b) Remove the 2 screws and mass air flow meter.