RX 350 FWD V6-3.5L (2GR-FE) (2010)
(b) Remove the wire harness clamp bracket.
(c) Using SST, remove the oxygen sensor from the No. 3 front exhaust pipe sub-assembly.
SST : 09224-00010
4. REMOVE NO. 3 FRONT EXHAUST PIPE SUB-ASSEMBLY
(a) Remove the 4 bolts, 2 nuts, 2 compression springs and No. 3 front exhaust pipe sub-assembly.
(b) Remove the 3 gaskets from the No. 3 front exhaust pipe sub-assembly.
5. REMOVE FRONT EXHAUST PIPE ASSEMBLY See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and
Repair/Removal
6. REMOVE NO. 2 OXYGEN SENSOR (for Bank 2 Sensor 2)
(a) Using SST, remove the No. 2 oxygen sensor from the front exhaust pipe assembly.
SST : 09224-00010
Up to 08/2009
2GR-FE ENGINE CONTROL: HEATED OXYGEN SENSOR: INSTALLATION
1. INSTALL NO. 2 OXYGEN SENSOR (for Bank 2 Sensor 2)
(a) Using SST, install the No. 2 oxygen sensor to the front exhaust pipe assembly.