RX 350 FWD V6-3.5L (2GR-FE) (2010)
Evaporative Emission Control Canister: Service and Repair
Removal
Up to 08/2009
2GR-FE EMISSION CONTROL: CANISTER: REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. PRECAUTION (w/ Air Suspension)
NOTICE:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Suspension/Service Precautions/Suspension
Control System.
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. REMOVE TAIL EXHAUST PIPE ASSEMBLY See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Removal
5. REMOVE CHARCOAL CANISTER PROTECTOR
(a) Remove the 3 bolts and charcoal canister protector.
6. REMOVE CHARCOAL CANISTER ASSEMBLY
(a) Using a screwdriver, pry up the retainer.
HINT
Do not remove the retainer.
(b) Disconnect the purge line hose.
(c) Disconnect the air inlet line tube from the charcoal canister assembly (leak detection pump).