RX 350 FWD V6-3.5L (2GR-FE) (2010)
Accelerator Pedal: Service and Repair
Installation
2GR-FE ENGINE CONTROL: ACCELERATOR PEDAL: INSTALLATION
1. INSTALL ACCELERATOR PEDAL ASSEMBLY
(a) Install the accelerator pedal assembly with the 2 nuts.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
NOTICE:
Avoid physical shocks to the accelerator pedal assembly.
(b) Connect the accelerator pedal assembly connector.
2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY