RX 350 FWD V6-3.5L (2GR-FE) (2010)
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation.
5. INSPECT FOR COOLANT LEAK See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection
6. INSPECT FOR FUEL LEAK
HINT
See: Testing and Inspection.
From 08/2009
2GR-FE FUEL: FUEL INJECTOR: INSTALLATION
1. INSTALL FUEL INJECTOR ASSEMBLY
(a) Apply a light coat of spindle oil or gasoline to new O-rings, and install them to each injector.
Text in Illustration
(b) Apply a light coat of spindle oil or gasoline where the fuel delivery pipe contacts each O-ring.
(c) Push and twist each fuel injector to install them into the fuel delivery pipe.
(d) Position each fuel injector connector outward.
NOTICE:
*
Be careful not to twist the O-rings.
*
After installing a fuel injector, check that it turns smoothly. If not, reinstall it with a new O-ring.
(e) Install 6 new injector vibration insulators to the intake manifold.
(f) Place the fuel delivery pipe with the 6 fuel injectors in position on the intake manifold.
NOTICE:
Be careful not to drop the fuel injectors when installing the fuel delivery pipe.