RX 350 FWD V6-3.5L (2GR-FE) (2010)
7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system See: Restraint
Systems/Air Bag Systems/Service Precautions.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
8. REMOVE NO. 2 AIR CLEANER INLET See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
9. REMOVE NO. 1 AIR CLEANER INLET See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
10. REMOVE BATTERY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
11. REMOVE NO. 1 ENGINE UNDER COVER
12. DRAIN ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
13. REMOVE AIR CLEANER ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Removal
14. REMOVE INTAKE AIR SURGE TANK ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal
15. REMOVE NO. 1 SURGE TANK STAY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Unit/Removal
16. REMOVE IGNITION COIL ASSEMBLY
(a) Disconnect the 3 wire harness clamps.
(b) Disconnect the 6 ignition coil connectors.
(c) Remove the 6 bolts and 6 ignition coils.
17. REMOVE SPARK PLUG
(a) Remove the 6 spark plugs.