RX 350 FWD V6-3.5L (2GR-FE) (2010)
Fuel Pump Relay: Service and Repair
Installation
Up to 08/2009
POWER DISTRIBUTION: INTEGRATION RELAY: INSTALLATION
1. INSTALL ENGINE ROOM JUNCTION BLOCK ASSEMBLY
(a) Connect the 3 connectors.
(b) Engage the 2 claws to install the engine room junction block assembly as shown in the illustration.
2. INSTALL NO. 1 RELAY BLOCK COVER
(a) Engage the 4 claws to install the lower No. 1 relay block cover.
(b) Engage the 3 claws to install the upper No. 1 relay block cover.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
From 08/2009
POWER DISTRIBUTION: INTEGRATION RELAY: INSTALLATION
1. INSTALL ENGINE ROOM JUNCTION BLOCK ASSEMBLY
(a) Connect the 3 connectors.
(b) Engage the 2 claws to install the engine room junction block assembly as shown in the illustration.
2. INSTALL NO. 1 RELAY BLOCK COVER