RX 350 FWD V6-3.5L (2GR-FE) (2010)
(c) Install the ATF temperature sensor assembly and clamp to the valve body with the 4 bolts.
Text in Illustration
Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)
Bolt length:
Bolt A
25 mm (0.984 in.)
Bolt B
85 mm (3.35 in.)
(d) Connect the connector.
2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve
Body/Service and Repair/Removal and Replacement/U660F Automatic Transaxle/Installation
3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Valve Body/Service and Repair/Removal and Replacement/U660F Automatic Transaxle/Installation
4. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and
Repair/Removal and Replacement/U660F Automatic Transaxle/Transaxle Assembly/Installation
5. INSTALL TRANSFER ASSEMBLY
6. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT
See the steps from "Install Automatic Transaxle Assembly" through "Install Engine Assembly with Transaxle" See: Transmission
and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/U660F Automatic
Transaxle/Transaxle Assembly/Installation.
From 08/2009
U660F AUTOMATIC TRANSMISSION / TRANSAXLE: ATF TEMPERATURE SENSOR: INSTALLATION
1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY
(a) Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.
Text in Illustration