RX 350 FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(d) Perform the following procedure when disconnecting a fuel tube connector (quick type B):
(1) Before disconnecting the connector, clean off any dirt that may be present.
(2) Pinch the tabs of the fuel tube retainer to disengage the 2 claws. Push the retainer down as shown in the illustration.
NOTICE:
Be sure to disconnect the connector by hand.
(3) If the connector and pipe are stuck, push and pull on the connector while holding the pipe by hand. Pull the 2 pipes apart to separate the
connector.
NOTICE:
Be sure to disconnect the connector by hand.
(4) Check if there is any dirt or other foreign objects on the sealing surfaces of the disconnected pipes. Clean the sealing surfaces if necessary.
(5) Cover the disconnected pipe and connector with a plastic bag to prevent damage and contamination.