RX 350 FWD V6-3.5L (2GR-FE) (2010)
14. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Installation
15. INSTALL NO. 2 CONSOLE BOX DUCT See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Installation
16. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Removal and Replacement/Installation
17. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
18. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
19. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)
(a) Inspect the suspension control system See: Steering and Suspension/Suspension/Testing and Inspection/Component Tests and General
Diagnostics/Air Suspension System/Test Mode Procedure.
20. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.
From 08/2009
AUDIO / VIDEO: REAR SEAT ENTERTAINMENT ECU: INSTALLATION
1. INSTALL MULTI-DISPLAY CONTROLLER ASSEMBLY
2. INSTALL NO. 3 MULTI-DISPLAY CONTROLLER BRACKET
(a) Install the No. 3 multi-display controller bracket with the 2 bolts.
3. INSTALL NO. 2 MULTI-DISPLAY CONTROLLER BRACKET
(a) Install the No. 2 multi-display controller bracket with the 2 bolts.
4. INSTALL MULTI-DISPLAY CONTROLLER ASSEMBLY WITH BRACKET
(a) Install the multi-display controller assembly with bracket with the 3 nuts.