lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Components|Page 385 > < Components|Page 383
Page 2
background image

(a) Disconnect each connector.

(b) Remove the 2 screws and air conditioning amplifier assembly.

From 08/2009

HEATING / AIR CONDITIONING: AIR CONDITIONING AMPLIFIER: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system  
  See: Restraint
Systems/Air Bag Systems/Service Precautions.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected  
  See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Removal and Replacement/Removal

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument

Panel/Service and Repair/Removal and Replacement/Removal

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument

Panel/Service and Repair/Removal and Replacement/Removal

6. REMOVE FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side  
  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.

7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side  
  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.

8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY   See: Body and Frame/Interior Moulding / Trim/Dashboard /

Instrument Panel/Service and Repair/Removal and Replacement/Removal

9. REMOVE INSTRUMENT PANEL GARNISH RH   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Removal and Replacement/Removal

10. REMOVE PASSENGER SIDE KNEE AIRBAG ASSEMBLY   See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal

and Replacement/Knee Airbag Assembly (for Front Passenger Side)/Removal

Components|Page 385 > < Components|Page 383