RX 350 FWD V6-3.5L (2GR-FE) (2010)
Brake Lamp Relay: Testing and Inspection
LIGHTING (EXT): STOP LIGHT CONTROL RELAY: INSPECTION
1. INSPECT STOP LIGHT CONTROL RELAY ASSEMBLY
(a) Disconnect the A52 stop light control relay connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
(c) If the result is not as specified, repair or replace the wire harness or connector.
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(e) If the result is not as specified, repair or replace the wire harness or connector.
(f) Reconnect the A52 stop light control relay connector.
(g) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration