RX 350 FWD V6-3.5L (2GR-FE) (2010)
OK:
Taillight relay operates. (Taillights illuminate.)
NG -- INSPECT INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE See: Lighting and
Horns/Testing and Inspection/Symptom Related Diagnostic Procedures/Exterior Lighting System
2. INSPECT INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
(a) Remove the instrument panel junction block assembly.
(b) Connect a positive (+) lead from the battery to terminal 2K-1.
(c) Connect a negative (-) lead from the battery to terminal A-14.
(d) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPLACE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (BATTERY - INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)
(a) Disconnect the 2K instrument panel junction block assembly connector.
(b) Measure the voltage according to the value(s) in the table below.