RX 350 FWD V6-3.5L (2GR-FE) (2010)
(b) Engage the 2 tabs into the holes as shown in the illustration to install the tire pressure warning receiver.
(c) Install the bolt.
Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)
2. INSTALL ROOF HEADLINING ASSEMBLY
HINT
Refer to the procedures from "Install roof headlining assembly" See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Removal and Replacement/Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. INSPECT TIRE PRESSURE WARNING SYSTEM
(a) Inspect the tire pressure warning system See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Testing and
Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure.